Buying A Roof Tile – Prices And Knowledge About Roof Tiles

Those who have studied more closely, will have learned that there are amazingly many different variants. When buying, it is important to pay attention to a high-quality, durable material and the possibility of a smooth installation. What possibilities are there – and what about the costs?

Roof tiles with folds ensure perfect sealing

Today, most of the roof tiles have at least one fold on the sides, which ensures good sealing against moisture and a relatively high degree of storm protection. The bricks interlock at the fold so that they are really firmly on the roof and no more water flows in between. If you would like to have it even more secure, use , which also have a fold at the upper and lower ends: you can look calmly at the next storm.

  • Flat : This brick has been specially developed for flat roofs, it helps the rainwater to transport more quickly. For real flat roofs it is not suitable, but depending on the roof, 10 or 15% inclination can be sufficient. have a special double fold for a better hold, the surface arches gently upward.
  • Hollow seam roof tile: This tried and tested type of roof tile fits both an old building and a new building. The brick looks like a reclining S and therefore forms wavy structures on the roof. This looks good and drains the rainwater in small, parallel streams.
  • The interlocking tile is a new variant of the interlocking interlocking system. While a simple beaver cover can not be used without shingles, this modern brick type can be installed in a simple layer of rainwater. The brick can be laid in the bandage as well as grout on joint.
  • Double- fold fold-down tile: This was a further developed folding tile which has two ribs on one side and a double groove on the other side. Due to the precisely manufactured press mold and the double fuse, it is considered especially storm-protected and has therefore become widespread.
  • Romanesque bricks: The appearance of a roof is like a typical monk-nun roofing, but the advantage lies in the much simpler installation. Unlike , the has a side and top edge, which reliably dissipates rainwater. The Mediterranean look convinces many homeowners to grab this brick form.
  • Reform brick: The brick reform is a typical renovated brick, because it can be moved so that it is useful for many bar spacing. In this way, old roof battens can be used without modifications, as long as they are still capable of being supported. The installation works quickly and simply, the simple optics keeps you discreet.

Real classics: roof tiles without fold with nostalgic flair

Of course, there are also roof tiles without fold in the wide range of the specialist markets. These are often traditional forms , which are often used in monument protection. But also new buildings with the “certain something” are sometimes equipped with false roof tiles. Overall, roof coverings without a rebate are, however, strongly on the retreat, as they usually have to be installed in complex crown or double coverings. Here are some examples:

  • Hollow pans: The non-ply hollow pans are also referred to as hollow tiles, and their long corner sections allow particularly tight laying. This results in a harmonious roof pattern, which can be found especially in listed historical buildings and bat houses. For a simple tiled roof the inclination should be at least 30 to 35 degrees, with a roof with a substructure at least 20 to 25 degrees. This ensures maximum rain safety.
  • Monk and nun: By name, this type of roof tile is certainly well-known, but what is behind it? This is a second brick, in which both elements wedge together. Each individual part looks like a halved hollow cylinder. In Mediterranean regions monastery roofs were once protected against rain with this covering – but with a little imagination, the term “monk and nun” can certainly be explained differently. The nun is laid down at the bottom, the monk, which is turned over, is sometimes additionally secured with mortar. With a substructure the roof pitch can not be less than 34 degrees, without a substructure a minimum inclination of 40 degrees is recommended. Our tip:Do you like this type of cover, but would like to buy a roof tile with a fold? Monk and nun are available in a modern variant also as a one-piece brick with fold system. This is how you get a similar look with a new covering material.
  • Biberschwanzziegel: The Biberschwanz belongs to the real classics under the roof tiles, it was already known in ancient Greece. In former times it has been laid on wooden spikes, today the double cover crystallizes as a favored laying variant, but also the crown cover is relatively popular. The rounded ends of the round-shaped bracing bricks form a characteristic covering, which is widespread in some regions. However, there are also other shapes, such as the basket arch or the so-called church mouse.
  • Krempziegel: Krempziegel already existed in the 11th century, still today they adorn many historic buildings, for example in the Harz. The brick is laid overlapping, with the curved side always arching over the high edge of the neighboring brick. The roof pitch should not be less than 35 degrees.

Costs for roof tiles – these prices are to be expected

On the basis of the above long list of different roofing tiles, it can be seen that the costs can also be very different. The variously shaped bricks are also waiting with different production methods and material qualities. Betondachkugel is particularly advantageous, the pure material price of which already starts at EUR 20 per sqm.

The practical and storm-resistant double trough bricks are not only popular due to their special properties, but also the costs are normally limited: they are available from about 25 euros per square meter.

Flat roof tiles for slightly inclined roofs also do not usually cost much more, as from 25 euros per sqm cover your roof. The famous monk and nun combination according to the historical model is often at least twice as expensive: No miracle, it is nevertheless a form of the double covering.

An old roof new cover – the prices vary greatly!

It is particularly luxurious with a slate roof, where you have to expect at least 80 euros per square meter. Often the prices also exceed 100 per sqm.

Our tip: Do you want a really chic slate optic, but the price is too high for you? You may be able to revert to fiber cement boards that look almost the same but are much more cost-effective.

When purchasing the roof tiles, pay particular attention to the load-bearing capacity of your roof structure. Some coverings are particularly difficult, in this case the concrete brick is to be mentioned. But also double covers bring a decent weight, which requires a particularly stable roof.